Class 40 Open Akilaria RC2 Geodis


We are pleased to present this very well maintained and continuously upgraded semi-custom example of the ever popular Akilaria RC2, campaigned by an amateur sailor but with the added benefit of sponsored support. This boat was inspected at the start of the 2014 Route Du Rhum and found to be very tidy and in ready to race condition. With the benefit of some weight shedding, water ballast optimisation and new Axxon rig in 2013 this boat has the abilty to keep up with much newer Class 40s and would be an ideal entry level into the class for the slightly more competitve sailor.

Race results.
2009 Fastnet 3rd
2010 Roma Per Due 3rd
2012 La Solidaire Du Chocolat 3rd
2012 Quebec – St Malo 4th
2013 Normandy Channel Race 4th
2013 Record SNSM 2nd
2013 Transat Jacques Vabre 6th

Designer: Marc Lombard
LOA: 12.19 m
BOA: 4.496 m
Draft: 3.00 m
Displacement: 4500 kg
Ballasts: 2 x 750 litres
Engine: 29hp NANNI diesel
Steering system: central tiller and two rudders
Construction: Infused vinylester glass sandwich
CE certification: category A
Conformity: Class 40
Shipyard: MC-TEC / Tunisia Built 2009 Launched 2010
- The AKILARIA 40RC2 is built in a female mould.
 - The hull is infused in balsa fibreglass sandwich and fibreglass foam on the upper sides.
- The deck is epoxy infused fibreglass foam sandwich.
 - All internal structures such as transversal and longitudinal bulkheads are in infused fibreglass foam sandwich.
- The ring frames are monolithic infused vinylester fibreglass from a female mould. They are glued to the floor of the hull with PLEXUS (methacrylate adhesive). This material guarantees a mechanical and chemical bonding.
- The deck is also glued to the hull with PLEXUS. Stanchions bolted through the hull/ deck bond complete the join.
- All the interior layout is composite made: Chart table, galley, storage units.
- Each and every piece is systematically weighed during the boat build.
Security on the deck:
A stainless steel pulpit, 2 stainless steel lateral push pits, a central push pit, with a double row of stainless steel lifelines all the way round, supported by 4 stanchions on each side. The stanchions are in stainless steel tapered at the top with a support leg.  A LEWMAR LP54 survey hatch is fitted on transom;                            
The cockpit was conceived to optimise manoeuvres and to optimise short-handed and solo sailing.  The central tiller is equipped with a telescopic SPINLOCK tiller extension. The mainsheet traveller is fitted on a transversal composite support.  The steering positions are recessed into the deck to optimise ergonomics.  Foot chocks on the cockpit floor provide footholds during manoeuvres. The cockpit is self-draining.
A double door inside access allows a central support where clutches and two winches are fitted
Water ballast system:
Two bailers SOFOSCOOP type n°2, electrical filling pump, sliding water gates. 750l water ballasts tanks shared in 250L (located in fore cabin) and 500L (located in aft cabins). Each ballast tank is equipped with a clear watertight inspection hatch and a vent to the deck.
Mast, boom and bowsprit are autoclave pre-preg carbon made.
Mast is a brand new profile with two sets of spreaders. It is fitted on deck on an anodised aluminium plate. The gooseneck fitting is attached with wound carbon, the masthead is also carbon made.
The bowsprit is side adjustable and has a rectangular section to avoid side flex.
The bowsprit orientation is made by a curved rail fitted on deck. Ropes are led back to the cockpit to optimise bowsprit adjustment.
Standing Rigging:
Rod standing rigging, on each side: 1 vertical rod on turnbuckle, 1 diagonal rod 1 on turnbuckle, 1 diagonal rod 2 on turnbuckle, 1 diagonal rod 3’ on turnbuckle.  The main forestay, inner forestay and two sets of backstays are textile made.
Deck hardware:
Winches are made by HARKEN:
  • 2 x B44-2STA on the central cockpit support
  • 2 x B45-2STR and 2x B48-2STR
All the sheaves are HARKEN.
Clutches are SPINLOCK one’s and stainless steel pad eyes are made by WICHAR
Steering System:
System developed and built in collaboration with JP3.
Central tiller on false stock and bearings, transmission to the rudders by aluminium rudder bars with ball and socket join.  49 mm diameter rudder stocks in F16PH in the rudder profiles.  The rudders hang beneath the hull and are made out of female moulds. The stocks are mounted on auto-aligning JP3 ball bearing bearings.
The keel fin made out hi-modulus steel and the lead bulb are manufactured by foundry Lemer.
The fin is finished off in the yard with PVC foam, fibreglass and Epoxy.  Particular attention is paid to the finishing of the profile. 
NANNI Engine 29 HP diesel sail drive on a mount integrated into the structure of the hull.
Engine compartment is ventilated by forced ventilation which is activated as soon as the engine is switched on.
Engine panel with rev counter in aft starboard cabin
SPINLOCK Gear lever fixed to cockpit side on portside.
531 diesel tank is under the cockpit behind the engine compartment.
Propeller is Gori Racing folding twin-blade.
Electrical installation:
1 Balmar 100A alternator for OPTIMA 50A engine battery
1 Balmar 150A alternator for 2 gel service batteries of 120A.
12v BEP electrical panel with breaker switches and batteries controller.
3 batteries cut-off switch.
1x12v socket.
LED HELLA red/white light with dimmer under coach roof in the chart table room, adjustable LED HELLA red/white light with dimmer in the fore sails store room , red/white LED chart light, waterproof LED lights in the engine room, aft sides room and behind the watertight aft bulkhead.
Red/green LED navigation lights on fore pulpit, LED white light on central aft push pit,  LED Mooring light on mast head.
Fore cabin:
A huge sails store room with opening to deck with a LEWMAR LP60 hatch.
Batteries storage is in bilge in front of mast bulkhead.
Chemical toilet.
Central cabin:
Double companionway with doors on hinges and lockers.
One step stair with easy in and out way.
Central chart table with vertical 180° revolving electronic panel.
3 chart table seat position: one inline of the boat and two side sitting possibilities.
Removable seat for side sitting position.
Electrical panel fitted above revolving electronic panel.
Central galley with stainless steel sink and one burner cooker.
3 x Pipe cots per side for sleeping or windward stacking
Aft cabins:
Huge storage compartment in the aft part in front of watertight bulkhead. Water ballast tanks are on hull sides with two clear watertight hatches.
53L fuel tank is behind engine room.
Water circuit:
Flush plastic through-hulls, with quarter-turn valves.
45 litres water tank beneath the chart table seat.
Two bilge pumps, one electric and the other manual. Automatic pump positioned behind the battery pack.
Flexible bilge pump hose, stowed on a reel behind the engine compartment.

Extra details
  • New Axon mast in 2013 weighs 180kg centre of gravity 60cm lower and 80 kg removed off the keel bulb
  • New ballast tanks further aft  – 750L, this has increased the performance of the boat
  • Measured Weight of boat is 4575kg but additional 40kg removed
  • New Galley and chart table modifications to save the additional 40kg of weight
  • Epoxy deck, Vinylester hull
  • New computer February 2013
  • Additional motion sensors to B&G pilots at a cost of 5000 Euros
  • Maxsea
  • Structural Upgrade with extra stringers forward with reduced main bulk head aperture
  • Current Class40 measurment certificate
Available for viewing in Guadeloupe at the end of the 2014 Route Du Rhum Transatlantic race

For full inventory and descriptive specification and to register an interest please contact:

Asking price: SOLD

Inventory and description to be confirmed and subject to contract.

Top of Page

[ Back ]
Privacy Policy | Web Design By Toolkit Websites